While rebuilding my mono wiper, decided to pull apart blower box and check things out. Slight tick in blower motor (as it slows to a halt) does not appear to be anything evident....no debris/leaves etc.

Temp sensor on outside of blower was brittle and fell apart in my hands when removing it....sensor was ok and I believe it works but external case was dried out!

Finally, the fresh air flap seemed to be moving while the fan was on...

Problem is that it is not connected to the vacuum pod that it should be connected to....linkage is missing....see pix...

Any ideas? Salvage yard? DIY?

Is the threaded rod supposed to attact to the ball on the lever?

Attached Thumbnails

     

__________________
Bryan Harter
1992 500E Smoke Silver
2002 CLK55 AMG Cab Silver/Black
2001 Harley Fatboy - Pearl White
2004 F150 FX4 Silver/Grey
1969 GTO Liberty Blue
1956 F100 Black