I have got the chain tensioner undone, was a 32MM socket. The Alternator has to come off.
Undone the electrical harness, for a while thought its impossible to do.
Tomorrow should be the moment of truth, since all the head bolts were loosened and out.
Need an engine hoist to lift the head with intake manifold.
The exhaust manif was out already since I unbolt the Pass/ left side engine mount, jack engine up the block tilt right so the exhaust manif can allow clearance.

One big support under the Intake Manif had not been located yet, not sure where it is.
There are 2 supports for intake M were undone already.
So please pray for me.

__________________