Quote:
Originally Posted by pmckechnie
At the bottom of the B-pillar cover there is a plastic cover held on by 2 Phillips screws. Remove this plastic piece. Pull the B-pillar cover out and down and the tip will unhook and come off. It will be necessary to remove the bolt attaching the seat belt to the floor so you can unthread the seat belt from the cover.
Paul
|
OK, I removed the screws and expected the cover to come right off, but it's still stuck tight. I tried a little gentle prying with a plastic putty knife but they didn't budge. Also, the PO broke a small piece out of one edge from apparently trying the same thing. What's holding them on?