|
Since you are dealing with three items... the top nut, the locking nut and the spring retainer nut.... the legit bought ' 3rd ' wrench to fit the lowest item is very handy ( as compared to using a screwdriver , etc )... since most of us have only two hands....and that legit lower wrench has a leg on it to hold it in place.
If you search ' bent wrenches' on this forum you should see lots of discussion on this...
I was caught like you are... all except a couple of the valves adjusted just fine my first time... I tried making the lower wrench just like I did make the two upper ones... but finally just bought the lower one...
|