Quote:
Originally Posted by thefreestate
I too am having the same problems. The end caps on the LCA were a pain to install. Used a shop press which worked but the end caps seem to be the wrong length/size. They dont fit quit as nice as the old one's. This is a Lemforder part-not aftermarket. The bearing bracket bushings have me stumped. Tried a shop press but they are still approximately 1/2" high. Any advice would be appreciated.
Wayne
|
I'm going to try the bearing bracket bushings tomorrow in the shop with a manual arbor press. The manual calls for rubber sliding paste........and lots of it. I'm going to use vaseline.