addbhp,

Dude,

If you did not already, carefully check fuse 7, and fuse D. They power the two relays involved.

Make sure you disconnected the correct sensor, forward of the 4 pin temp sensor at rear of cyl head....do this with the engine running. This activates relay in possition C. of relay box at rear of fuse box.

To sumulate high AC temp jumper the wires that connect to the wires attached to the switch in the photo...see arrows. Note do this also with the engine running. Also note that If the fans do not come on here don't worry because they will never come on until you repair the AC system anyway.

If the fans do come on here, everything is in order, they will not come on untill the sensor senses hi temp at the dryer (only possible with a charged and working AC system)

Good luck with it,
Acky