Quote:
Originally Posted by 2020pup
Attachment 67608
Pulled the injectors out and hooked the lines back up to see if i was getting any spray or anything out of them. I got nothing. guess something is wrong in the distribution. also too look at this injector this is all the came out but my book shows a cone shaped seal that goes along with the one that is on it. Is that the case? actually it shows the one that is on the injector now, a cone shaped, and it looks like a regular o-ring
|
Yes, it sounds like something is wrong with the Fuel Distributor, providing you're getting the correct pressure and volume at the input.
How about the EHA Valve? I've read where some have experience a no fuel conditions due to it being faulty. Maybe the previous owner turned the EHA adjustment screw and got it out of spec. Hopefully another member will reply to this post that has Fuel Distributor experience.
Have you removed the Fuel Distributor to verify that the plunger is moving properly?
If I remember correctly, the injector seals I replaced on my '93 2.3 looked like the one in the attached photo.