View Single Post
  #8  
Old 05-14-2009, 07:39 PM
slk230red's Avatar
slk230red slk230red is offline
WECO Installer
 
Join Date: Jul 2006
Location: Tampa, FL
Posts: 820
Quote:
Originally Posted by professor View Post
How about fuel pressure readings?

Quote:
Originally Posted by 2020pup View Post
ok for todays update...I did what MB doc (thanks for the pic)said and there was no change in the car. It's still doing the same. It will almost start but won't run. Put a little gas down the air valve and it fires right up then quickly dies. Every now and again can really pump the throttle and it will stumble around for about 3 mins and die. Check fuel pressure and it is the same as before. 80 psi. I also did what tinypanzer suggested (thanks for the pics too). Took 9 volt battery to idle control valve terminals and got no sound, no nothing. Checked the hoses too and they are ok even the one that runs under intake (used a mirror). So whatcha guys think now?
He states the pressure is good (80psi) to the Fuel Distributor, but might be a good idea to re-check.
__________________

1993 190E 2.3
2001 SLK230
1971 LS5 (454) Corvette Convertible
Reply With Quote