Quote:
Originally Posted by Uncle Acky
Use a mirror, propped up and angled so you can see what you are doing. Also use a light. You can thread the screws in to just make sure the threads are not stripped.
Unfortunately we don't know what has been done in that area in the past.
Make sure the battery gets a full charge and test as required.
Acky
|
Thanks Acky. Thanks to your suggestions I did get the old part back in. I'm going to go buy jumper cables and a volt meter. I topped of the water in the battery. After I go get the supplies I will jump the car and measure the volts as you and others prescribed. Where should I connect the volt meter needles to measure the volts?