|
On that car...........the idle control valve is controlled by the CIS-E computer.
Not a 12V circuit.
You need a meter with duty cycle function to measure control circuit.
You can't disconnect to test! the connector must be slid back but not disconnected.
At that time you start car & measure duty cycle between the 2 pins, MUST be careful NOT to touch them together!!
__________________
MERCEDES Benz Master Guild Technician (6 TIMES)
ASE Master Technician
Mercedes Benz Star Technician (2 times)
44 years foreign automotive repair
27 Years M.B. Shop foreman (dealer)
MB technical information Specialist (15 years)
190E 2.3 16V ITS SCCA race car (sold)
1986 190E 2.3 16V 2.5 (sold)
Retired Moderator
|