Quote:
Originally Posted by JonL
Are you sure you are measuring in the right place? Pistons are often larger in one direction than the other (parallel to the pin vs. perpendicular, I don't remember which is usually larger.) Measuring the skirt or the lands? Have you checked the calibration of the micrometer?
|
ive measured them in different places at the lands at got no measurements close to the specs. I measured like you do the sleeves diagionally directly across on the top. I did check my micrometer to see if it was calibrated right and it is.
__________________
1986 300SDL, 211K,Dealership serviced its whole life
1991 190E 2.6(120k)
1983 300D(300k)
1977 300D(211k)
|