Thread: OK, where's the fuse in my gp relay- grrrr
View Single Post
  #13  
Old 06-22-2009, 09:02 PM
compress ignite's Avatar
compress ignite compress ignite is offline
Drone aspiring to Serfdom
  
Join Date: Feb 2004
Location: 32(degrees) North by 81(degrees) West
Posts: 5,554
"I measure about 10.98V on the 5 pins that the gp leads go on."
Your GP relay is working.

If you've got power to the Pins like that...
'only two things left to check
1.Wiring from the pins to the Glow Plugs
2.Glow Plugs

I hate to say it but "Ohm-ing Out" GP s Ain't Always a 100% proposition.
(Twelve Volts TO THE Plug,WITH it out of the engine is the Definitive Test!)
You say your plugs are only a year old...
Did the Glow Plug Holes get reamed out to remove Carbon-ization?
Are the Glow Plugs Beru or (Second Choice) Bosch? [Anything else is Junk]
__________________
'84 300SD sold
124.128
Reply With Quote