Surfblau,

I obtained an "internal" compressor that looked like the one you have pictured and could not get it to work. I was unable to get it connected to the rear springs due to space restrictions. Very frustrating. Finally rented the PerformanceProducts tool, which worked like a charm.

Earlier, I had used an external type compressor on my front springs. That one was the type that uses little "u" clamps to attach long bolts to the outside of the spring. I got it to work but don't recommend it and probably wouldn't try it again. Just not worth the stress.

Unfortunately, there appears to be no way out except via the right tool in this instance.

Nic
'85 300CD