Hi all,
Yes, I know another one on the above. However, after searching the thread on this and there are many posts, I cannot seem to get any one into a square room to give me an answer on this. Would appreciate a little HELP. I have a very good running daily use 1986 300SDL and would like to change out the OEM fan clutch and the Alum. fan blade.

What I would like to know is as follows:

Part number for the 606 Clutch (Remember this is going on a 1986 300SDL):
Part number for the fan 9-blade plastic fan:
Part number for the 11-blade plastic fan if used:
Part number for the nuts and bolts to make the change to the plastic fan if needed:

For those who have a 300SDL and made the change, what have you noticed. Good, Bad, not much difference? Any and all will be appreciated.
Thank you,
Ron