Thread: 95 C280; possible bad ignition coil?
View Single Post
  #4  
Old 07-19-2009, 10:49 AM
Arthur Dalton Arthur Dalton is offline
Registered User
  
Join Date: Aug 1999
Location: Florida / N.H.
Posts: 8,804
Don't buy a coil if you moved the coil with the plug connector still attached.
It is the plug connector/resistor that is always FIRST suspect on 104/DIS ign system.

When moving coil, one MUST not move it with the connector b/c you have not isolated the fault as coil if you do.

If you did move coil ONLY, then your diagnosis is correct.

I only mention this b/c it is a very common mistaken diagnosis for a simple bad plug connector.. [ which are the cause of 80% of 104 mis-fire codes, along with Plats]
__________________
A Dalton
Last edited by Arthur Dalton; 07-19-2009 at 11:14 AM.
Reply With Quote