Alignment correction bolt kits secure the lower control arm. There are 2 (1 for caster & 1 for camber) on each lower arm.

Correction of approx 0.3deg of caster OR camber can be done with those bolt kits.

The original bolts have a POINT at the threaded end. The correction bolts are FLAT at the threaded ends.

The replacement WASHERS have notches that hold the control arm in the corrected position.

__________________
MERCEDES Benz Master Guild Technician (6 TIMES)
ASE Master Technician
Mercedes Benz Star Technician (2 times)
44 years foreign automotive repair
27 Years M.B. Shop foreman (dealer)
MB technical information Specialist (15 years)
190E 2.3 16V ITS SCCA race car (sold)
1986 190E 2.3 16V 2.5 (sold)
Retired Moderator