Ok
Here are the 3 coils codes.
You have a code for coil 1 ..

21 Ignition output 3 or ignition coil for cylinder 1 and 6
22 Ignition output 1 or ignition coil for cylinder 2 and 5
23 Ignition output 2 or ignition coil for cylinder 3 and 4

Pull the cover to the coils and swap that coil with another..

Read this twice:

DO NOT swap anything else..take the connector under the coil OFF the offending coil when you do the swap b/c if you don't ,we will not know if the swap is the coil or plug connector.
Then run it and see if the code followed the coil...

If it does , [ 21 or 23] you have a bad coil ..if it stays code 22, you have a bad connector.

__________________
A Dalton