If you used a small pilot bit to make a starter hole, then found one of these in the right size....you could put the tip in the starter hole to guide the bit and slowly grind the bolt head down to nothing, then just pop the wheel off and unscrew the rest of the lug. Done correctly I bet it would work quite well....

__________________
-diesel is not just a fuel, its a way of life-
'15 GLK250 Bluetec 118k - mine - (OC-123,800)
'17 Metris(VITO!) - 37k - wifes (OC-41k)
'09 Sprinter 3500 Winnebago View - 62k (OC - 67k)
'13 ML350 Bluetec - 95k - dad's (OC-98k)
'01 SL500 - 103k(km) - dad's (OC-110,000km)
'16 E400 4matic Sedan - 148k - Brothers (OC-155k)