hi everyone!

I consistently get 60psi at the rail every time i turn the key on, after attempting to start it would drop to about 53psi. When I leave the car for a few hours, i would find the gauge at zero psi, I assumed it was because the fuel has exited back to the tank (i remember the rail has this ability). Since I installed the gauge 3 days ago, every morning before I'd work on the car or just look at it, I would find the gauge pegged at zero too.

I hope to build the code reader soon as I get home in a few hours and report what's stored immediately. Also I will bleed off the gauge to remove residual to re confirm pressure at rail before and after turning key on. Thanks so much for the ''push'' guys! Keeping my fingers crossed for now.