Quote:
Originally Posted by WINGAS
Had the same issue, and as wal says, it was because I didnt clean out the oil from my first head bolt. Rounded that sucka nasty.
Borrowed an extraction set, Craftsman, from a buddy. It goes on reverse twist, so when you try and loosen , it digs into the head hard. Worked like a charm.
|
Congrats,
Remarkably, the extractor I used went in about 1/4" and that includes the
chamfer on the extractor.
I was a machinist for 10 years, then rebuild machines, now I only have a
lathe and mill at home.
Makes it easy to make parts, + friend owns steel yard.
Well, and a mig, plasma, ac/dc welder for toys.
The real problem was only distance from home!