Quote:
Originally Posted by okcraig
OK, I've located the plunger and the shaft part that I think should move it. I've got the body back in place and the plunger does move as you move the gear lever. However, it moves from park to R to D to 3 to 2 to 1 with no problem. But as you move the elector back to P the plunger does not move back. Is this possible becuase there is no pressure against it since the car is not running? TIA
|
OK, put fluid back in and started it up but with the same results. I don't have a good picture of the part that mates up to the shifter part. But it's plastic and has kind of a l shape to the piece that appears to mate with the pin which sticks out of the shifter piece. Its hard to tell if this is broke or not but I'm thinking that this should probably be a U shape so that the pin pulls it in both directions. I don't know if you can buy this piece or not but I'm thinkking it might be better to buy a complete new or rebuilt valve body. I'm probably going to sleep on it tonight and do some more reasearch. Please pass on your thoughts. Us retirees need to stick together. Thanks for your help.