Quote:
Originally Posted by tangofox007
Yes, the selector valve should be positively engaged in both directions. My recollection is that it is possible to install the selector valve upside down. Or possibly 90 degrees off. Is it possible that that occurred? The valve is indexed by a long groove on the valve and a projection on the retainer plate.
|
I had not removed the selector valve from the body, just the K1, K2, and B1 springs. So it is in the same position as before. But thanks for the suggestion. I'll see if I can find a good picture of one and compare them. Thanks again for all the help. I'll also try and get a picture of mine and post it. Have a good Sunday.