Confirmed, no voltage while key on and knob pulled out. Wifey did the inside while I checked and confirmed. I triple checked that she was doing everything they same way I was. I have tried preheating for several minutes, now I know why they call it a gorilla knob!
No fuse listed in the wiring diagram, as far as what the old Chilton book says anyhow. I always have taken them with a grain of salt, though.
Thanks for the quick response,
Rick
Quote:
Originally Posted by 79Mercy
Are you sure the gps aren't getting voltage, did you have some one hold the knob out while you check the voltage?
You are using the knob correctly right, pull it out to the first position and then pull it out just a bit more until it stops and hold for about 30 seconds. It takes a long time for those old loop plugs to heat up and for the salt shaker to glow.
Nope there is no relay, cant remember if there is a fuse or not, im sure there is one under the dash.
|