I tried to load some pictures, but was asked for a URL, wasn't given the option to load from my computer. What I did was remove the idle speed control module, located behind the glove box, and went over all the solder connections, then I removed the idle control solenoid and cleaned it out with carb. cleaner, then checked all the vaccum lines I could see (replaced a rubber connector on one), and that was about it. All these were suggestions from other members that had the same problem. There is a link titled "high idle hell" from one member that goes into detail about everything that should be checked. If you type in high idle hell in the search box, I believe you will find it.

If I ever find out how to post pictures I will do so.