Today I took out my g-tech to take a few HP measurements at 0.5 bars of boost.
Here are the results :
The spark table for runs 2 and 3 is modified with +2 deg.(run 2) and -2 deg. (run 3) from that of the first two runs. What comes to my attention is that the torque falls off steeply after ~ 4700 rpm. Also I calculate about 14.6 hp loss due to aero drag, so you can add 14.6 hp to the results to get approximate dyno hp.
Tried to get some 1/4 mile results but that didn't go so well because I have some problem in the drivetrain (probably the driveshaft bearing) so I can't floor it until after the middle of 2-nd gear (otherwise there is a lot of vibration), any how here are the results from the attempts :
