Thanks for that tip! Well, its good to know that if this new clamp dont stop the leak, that I can replace it without removing the pump!
Yeah, the MB hose looks much thinner, but this hose is so old, it was very stiff. I would definitely have to cut it off... probably with a chain saw!
Thanks again
Quote:
Originally Posted by J.HIDALGO
you will find that I did replace the hose without removing the water pump. It is NOT going to be easy but, it is possible. Keep in mind, as mentioned before, once you remove/cut the hose, you are committed to finish the job and yes, get the MB hose.
You decide. Either way, good luck!
|