Quote:
Originally Posted by artony12
I edited my post to say that i also changed the coolant sensor and some coolant seems to have leaked on the crank shaft position sensor as it is quite wet in that area. Could that effect my ignition?
the plugs I put in where Bosch super plus-HR9 DC+ It had platnums but it ran. Would it at least not fire? Thanks
|
The plugs you used are Resistor plugs.... H R9DC+.....you'll have to go to the dealer or this website to get the right ones.
It should have fired and possibly run, but not if the coil/wires/rotor/cap are not perfect. It is harder for the ignition system to get a decent spark with resistor plugs....so if it is weak in any way, it won't work. As you have mentioned all those parts are real old, you should probably replace all of it. I did on my 300E and it runs perfect now.
__________________
-diesel is not just a fuel, its a way of life- 
'15 GLK250 Bluetec 118k - mine - (OC-123,800)
'17 Metris(VITO!) - 37k - wifes (OC-41k)
'09 Sprinter 3500 Winnebago View - 62k (OC - 67k)
'13 ML350 Bluetec - 95k - dad's (OC-98k)
'01 SL500 - 103k(km) - dad's (OC-110,000km)
'16 E400 4matic Sedan - 148k - Brothers (OC-155k)
|