Quote:
Originally posted by Mike Phillips
The basic problem is leveling the touch-up paint with sanding paper and NOT sanding on the surrounding area. Pretty hard not to do.
Then when you buff out your sanding marks, what you realy want to do is only buff, again, on the touch-up paint, and not the surrounding paint. Pretty hard not to do.
|
Yes, that is a problem, which is why I use the blue tape. I tape off very close to the chip so I don't get the surrounding paint. Then when I use the Swirl Free Polish, I remove the tape and polish the area.
I'm no stranger to wet sanding, but I wouldn't say I'm an expert. So far I haven't had a problem.
I will try skipping the wetsanding next time and see how it turns out. If I can skip a step, then I can be done that much faster.