Guys-I go the car to run. I first installed new plugs and went back to my trusty can of ether with fuel relay unplugged and it fired momentarily until it exhausted the ether. When i went to plug in the fuel relay, the car would not start so I unplugged the fuel relay again and sprayed the ether and it ran again momentarily. Back with the fuel relay and almost starts after jiggling the two hoses at the ICV. I went in the house and recall advice given by as shop owner in Florida that advised to disconnect the EHA plug to omit all electric inputs/sensors with a no-start. Went out unplugged the EHA and bang it started right up! The car idles rough and to be honest I am not sure exactly why the car started-new plugs or vac leak at the two hoses at the ICV. Will of course investigate further. Also, I had a trouble code for the 02 sensor so my CEL came back on but for now i happy to get the car started!! Thanks to all except dh jenkins-joking!!