Quote:
Originally Posted by mikethezipper
So after spending a good two days trying to get the viscofan off, and finally succeeding, four wrenches later,
|
Do yourself a favor and don't rush the job. Those four screws are now toast and you are well advised to get a new set from the dealer before putting the fan back in place.
As stated above, you need to take a 10mm box wrench and grind the nose down to almost nothing so that it fits over the screws.
That job is a real PITA. I just got done with it so that I could install some alternator belts on the SD. Getting the screws started into the holes is damn near impossible.