Quote:
Originally Posted by toomany MBZ
I only know how to reboot the computer vs. any particular section. I did so and have the same results. I can tell it is faster than it used to be.
After searching the web about my system, (eMachine T5212) I understand 2 GB is what it'll take.
I don't understand number 2). at all, well, power off of course.
|
Hmm... first thing I do when I'm putting RAM in a machine is go to c r u c i a l . c o m. They've got an an easy to use interface and excellent information on how many slots, type of RAM and how much it will hold for your type of machine.
1GB is good, 2GB is better. #2 suggestion is gently reseat your RAM with the power off - preferably power cord unplugged.
Once you've reseated your RAM, boot it up and go into the BIOS as suggested and see how much memory it sees. If BIOS don't see it, Windows wont either.
Many computers have a built-in video card which uses shared memory for video card memory. This is probably where some of your RAM is going. Not 1GB though I'd think.
Great feedback from the everyone on this issue.
Info from crucial for eMachine T5212:
Two memory slots. Each memory slot can hold DDR2 PC2-5300 with a maximum of 1GB per slot.
* Module Size: 1GB
* Package: 240-pin DIMM
* Feature: DDR2 PC2-5300