View Single Post
  #5  
Old 07-03-2002, 12:49 PM
Arthur Dalton Arthur Dalton is offline
Registered User
 
Join Date: Aug 1999
Location: Florida / N.H.
Posts: 8,804
An added note to JFs reply..
Not only are there two seperate sensors, but the later models retained the same system but encased the two into one 4 pin connector sensor.
The single 4 prong still has two seperate thermistor circuits
[both with the same values] , but are isolated from one another electrically so as not to feed info from the aux fan one to the engine management FI/Ignition module....

If both were referenced for Eng management, then two sensor
circuits would be unneccessary...
Reply With Quote