Quote:
Originally Posted by LUVMBDiesels
The memory worked for a while, but it does not any longer. I forgot to reset it after changing the car battery  I will look at the floor tonight. The seat moves forward and back OK, the only issue is the seat back recline. If I can get it upright I will reset the memory and it should be OK until I can get the door panel off when it warms up.
Thanks!
Joe |
Joe --- resetting the memory will NOT help you get the seat up.
If a previously stored position had the seat position UP, then pressing the button would bypass the seat reclining switch on the door and the seat would move to the "stored position".
You should be able to remove the seat "buttons" and be able to get (spray) some contact cleaner into the switch without removing the door panel.
Good Luck.