Nothing really... Just be sure the vehicle is properly supported, use spacers on the new axle and be sure to remove the fill plug before you remove the drain plug. I used a little dab of anti sneeze on the plugs. The whole procedure is not that difficult. Especially if you follow one of the DIY threads in the Resources area.

In regards to the spacers.. You may have to get new ones to make it a tight fit. If you are using "used" axles be sure the boots are in good shape before you replace the axle.

I have done a lot of work under there and I have never had a hard time getting a jack under the diff.?

__________________
AJ

1985 300D (SOLD)