Quote:
Originally Posted by atikovi
I scanned the EDS system for the first time and found five stored codes including 007 starter ring gear speed sensor. After I erased the codes that was the only one that was still present (for now). How can I test the sensor before I replace it? A resistance check? An ac voltage output while the engine is running? What should be the specs?
|
When you pull the codes on the EDS system the engine must be running at the time the codes are pulled. If it isn't you will get the 007 code, I guess because since the engine isn't running the EDS computer doesn't see a engine speed signal. Try to erase the codes with the engine idling and see if the '007' re-appears. I'm betting it won't.
On an unrelated note a couple of months ago GSXR asked you a question about how your SDS clone was working, he wanted to know if you had tried it with your 400E and what systems it was able to connect with.
Have you used it with any other of your MB's? How's it working?