Quote:
Originally Posted by hookedon210s
Has the fluid in the clutch hydraulic system and the brake system been flushed? This should be done every 2 years. The boiling point of brake fluid decreases substantially as it adsorbs water. If it hasn't been flushed I would do so. Be sure to use DOT 4 approved fluid. Mark
|
I replaced the line running over the gearbox to the slave cylinder last year. At this stage I flushed the brake/clutch fluid. Perhaps I should do it again... I can't remember if I did all the brake lines as well or just the clutch line. I used a pressure bleeder pushing fluid through the bottle to the slave cylinder bleed nipple... Is that correct?
Thanks,
Jason