I read the codes, and found the following:
Pin 17
#8- Transmission overload protection switch does not close
Pin 8
#9- LH-SFI control module voltage supply, open circuit
Pin 7
#5- stop lamp switch
#6- starter lockout / back-up lamp switch
#14- Closed throttle position switch
#3- this one references numerous things, including:
-reference pot.
-actual value pot.
-safety contact switch
-closed throttle pos. switch
-actuator motor
-magnetic clutch
I erased all the codes and will read them again in a few days. I imagine some of these may be leftover from before I replaced the wiring harness, years ago.
I'll be looking more into what specifically these codes could be pointing to. Any information regarding these codes or similar experiences would be greatly appreciated!