Hello everyone,

I've been tracking down a fuse blowing issue and I believe I found it.

Fuse #5 blows when the engine is cold and one backs out and then engages drive...

After pulling the upshift delay relay (on firewall near fuse box and ovp) the fuse no longer blows..

So two things:

1) the wiring to the solenoid is grounding out and blowing the fuse
2) the solenoid is bad and blowing the fuse..

So has anyone ran into this problem before?

Can the solenoid be replaced?
Is it important that the solenoid be replaced? Will not having the upshift delay functioning damage the transmission?

__________________
Cruise Control not working? Send me PM or email ([email protected]). I might be able to help out.
Check here for compatibility, diagnostics, and availability!

(4/11/2020: Hi Everyone! I am still taking orders and replying to emails/PMs/etc, I appreciate your patience in these crazy times. Stay safe and healthy!)


82 300SD 145k
89 420SEL 210k
89 560SEL 118k
90 300SE 262k RIP 5/25/2010
90 560SEL 154k
91 300D 2.5 Turbo. 241k
93 190E 3.0 235k
93 300E 195k