|
I took a vice grip and section of the old belt and built a strap wrench out of it...
Wrap the pulley in the old belt, and then take the vice grip and pinch down on the belt as tight as you can to the pulley...
A picture would make it easier to show, but it was tight enough for me to get the bolts out of my water pump pulley.
__________________
-Justin
91 560 SEC AMG - other dogs dd
01 Honda S2000 - dogs dd
07 MB ML320 CDI - dd
16 Lexus IS250 - wifes dd
it's automatic.
|