Quote:
Originally Posted by ggenovez
OUCH!!!!
The manual states to remove the tire, fluid from differential, apply parking break, then attach a "suitable" puller and attach it to the hub using the road wheel bolts...
I take it there is no such tool available...
Thanks for your reply...
|
When I did my 240D axles, there was no need for a puller on the outer wheel-flange or hub. The outer axle-joints came out from behind after removing the center bolts and tapping with a brass-drift.
I did need to remove the diff-cover and pull the clips to release the inner axle-joints.
The special tool I referred to is for crimping the replacement two-piece steel cans onto the axle-joint.
Happy Motoring, Mark