Quote:
Originally Posted by dieseldan44
For an oil change the W123 82-85 300D (with a 617.952 turbo motor) takes exactly 6.5 quarts to fill it to halfway on the dipstick. Thats how I do it...no need to guess and check over and over.
|
i'm looking at the book and non-turbos are 6.0 quarts and turbos are 7.9, however the bottom of the chart in my Haynes manual says this in italics.
**
Note: Capacity is approximate; actual fluid level should be measured as described in the appropriate Section.
In Section 15 (Oil Change) the directions say:
...
add enough oil to bring the level to the upper mark on the dipstick.
Interpretation?