Quote:
Originally Posted by dubadaddy
Yeah, unfortunately the write ups are pretty vague when it come to the method. Not very accurate desciptions of what you should be looking for.
|
I'll try to find the write up I used when I first did this. It may have been in mbworld but if I run across it I'll post it for you.
Another tool that works well is those doglegged allen wrenches that come in pouches and have several sizes in them. That's what I used after my original MB tool didn't work anymore after I replaced the pulley mount piece with a Febi replacement when the bearing imploded. I digress, if you have replaced this with a Febi, the o.d. of the location hole in the pulley will be too small for the MB tool so you will have to improvise. Boo to Febi.