Thanks for the info.

Per the instruction sheet for the Bosch wires I put grease on the rubber parts of the boots only and very sparingly. Nothing in the cap and rotor area. I also put a new seal on the distributor cap as the old one was hard. The car does run and start much better now. It felt like it needed a "tune up". So i have new plugs, wires, cap, rotor, cap gasket. I also changed the engine oil/filter on it (really need a different filter wrench).

So all is good now.

I do have a very intermittent Stalling issue when decelerating to a stop. it just won't catch idle at times. Been searching the boards on that one. Other than the stall and the need for a brake job soon its doing well!