I couldn't get the correct angle for a wide shot of the back side of the compressor. Here are a series of photos with a pencil pointing to each removed bolt.
Smallish bolt that holds the refrigerant lines to the compressor
Smallish bolt directly below the one pictured above. Connects compressor to some sort of arm
One of three large bolts. Located in rear, closest to the engine
Second of three large bolts. Located on rear, closer to the top, furthest from the engine. Attaches to tensioner.
Third of three large bolts. Located on the rear, near the top of the compressor. This is the only bolt I have not removed, but it has been loosened.
Another view of the tensioning bolt. The bolt is removed so you can see the washer
Hopefully these photos help.
My current plan is to cut this belt, remount the compressor, and try again with a larger belt.