|
Frank;
No welding involved. The balljoint is pushed out from the top and pushed in from the bottom. The two long bolts pull the two pieces of barstock together, and with correct pipe size, the joint is either pushed into the pipe to remove---or pushed into the pipe to install---which side of the joint you place the pipe on is determined by whether you are removing or installing. One size pipe is used to install and another size to remove.
__________________
K. Weimer
300SD (1)
300D (5) [Plus 1 parts]
300SEL 4.5 (2)
280SE (4)
280 (2)
250 (1)
250SE (1)
240D (7) [Plus 1 parts]
220D (11) [Plus 3 parts]
200D (2) [Plus 1 parts]
180c (with sunroof)
1995 Nissan UD1800 rollback
"If I can't fix it, it don't get fixed"
|