|
I got them on ebay from Animore. They are not always up on there.
No leaks, though I didnt put any glue or sealant between all the butt joints. If I spray directly with a hose some will squeeze through though.
Cut wind noise down some, still hear a bit but it is not bad, these cars dont have the best aerodynamics.
Only issue, and it is not the seal's fault, is that the DS window doesnt slip under the seal like it should. I thought it was this way because of the old seal being hard, but it does this with the new one too... Suppose this means it is actually a regulator geometry issue...
__________________
Current Diesels:
1981 240D (73K)
1982 300CD (169k)
1985 190D (169k)
1991 350SD (116k)
1991 350SD (206k)
1991 300D (228k)
2008 ML320 CDI (199k)
1996 Dodge Ram CTD (442k)
1996 Dodge Ram CTD (267k)
Past Diesels:
1983 300D (228K), 1985 300D (233K), 1993 300D 2.5T (338k), 1993 300SD (291k)
|