|
Here is the photo of the 87 seat chassis. The 2 plugs in hand show the location/configuration of the 2 plugs swaped when replacing/rewiring the seat-back from a newer e320 seat to my driver's side '87 300TD seat chassis. The 2 plugs from the e320 seat-back wiring harness just plug directly into the receivers shown next to the pulled plugs. And the seatbelt plug is also the same. Before removing any seat, remember to adjust the seat up and back to get the best access to the floor bolts, and for accessing the 2 screws at the front of the chassis. Also note that the e320 passenger seat chassis plugged directly into the "87 wiring harness - no dismantling required. Good luck.
|