Quote:
Originally Posted by hobberslobbers
thx for the tips.......... so, i went for a drive with my mighty vac under the wiper and, under acceleration, the lowest the vac went to was 5". it should be at 0" (no vacuum) for a normal shift, right? how do i get the vac to be at 10" at idle? i have read about orifices to put on the vac line going to the main vac line, and there is a yellow one on there already.
|
Refer my last post and the link I posted and all will be revealed.
The DOME on the vac' valve mounted on the i/p must be pried off and the nut/bolt clamp on the shaft can now be adjusted.....at half throttle aim for 5 inches.