View Single Post
  #2  
Old 06-20-2010, 04:35 PM
CamelotShadow's Avatar
CamelotShadow CamelotShadow is offline
Registered User
 
Join Date: Aug 2007
Location: Valley Village, CA
Posts: 1,163
trouble w euro secs

light doesn't fit
the tail light in the sec is shorter & outside bulb holder is on the bottom not in the middle as the one I got which I think came off of a 84 sel

also the wiring is strange as they played with the end light to make it fit on the board n it has a smaller bulb with the glass bottom not the regular
10w/6cp thats in the manual

arggh

also the outside light is not working on the passanger side
they have it screwwd into the plastic hole & have a red wire which came off that was either wrapped around think its 6 prong anyway the bottom right prong or maybe on the screw as a ground?

Also the passenger side plug has one less pin than the stock light
which to confuse matters as the drivers side plug has 7 prongs oh & lucky has that last bulb that is not in the manual

oh & drivers side tail has a plug on top going into the pronged socket
where as the passenger side is missing this plug n wire so don't know if thats a problem that needs repair as I can't get the small tail light bulb to work...???

LOL

think Im going crazy
\
__________________
~Shadow~


83 500 SEC Euro 198K
Reply With Quote