Quote:
Originally Posted by RBYCC
It needs to be programmed on a dyno.
The AIC1 map uses RPM and boost as the main parameters.
|
No available dyno here !
Quote:
Originally Posted by RBYCC
When you first make your selections in the R2 software select "3 cylinder-2 stroke " as the engine type.
The instructions do not mention this but it's a bit of a tuner trick when using the AIC1.
It will make the injector pulses more finite.
|
Done
Quote:
Originally Posted by RBYCC
You need to install a wideband O2 sensor which will give the feedback for the AFR settings.
|
Done
Quote:
Originally Posted by RBYCC
Under boost you probably want to have an AFR around 11.7.
|
Doable
Quote:
Originally Posted by RBYCC
The dyno is the only way you can tune for max power.
|
What if no dyno is available here ?
Thanks